Sensor Table

The Sensor Table includes all of the information related to the sensors used in the testing.  It includes the names, types and location of the sensors.  For more information about the CC8 Phase 3 Joint Comparison sensors, click here. 

 

TestItem Location of test area (north or south).

SensorID

Number used for sensor identification.

SensorName

Name assigned to the sensor. The first letters identify the sensor type.

SensorType

Information such as full bridge, vertical displacement, and deflection.

Unit

Units the sensors record in.

GageType

Returns thermocouple, moisture sensors, embedded gage, potentiometer, and eddy current sensors.

LocationX_FT

Sensor location X coordinate in feet from Instrumentation Plan.

LocationY_FT

Sensor location Y coordinate in feet from Instrumentation Plan.

LocationZ_N

Sensor location Z coordinate in inches from Instrumentation Plan.

Calibration Factor 1 Parameters used during data processing, includes sensor position as well as sensor scaling and offset values.
Calibration Factor 2 Parameters used during data processing, includes sensor position as well as sensor scaling and offset values.
Calibration Factor 3 Parameters used during data processing, includes sensor position as well as sensor scaling and offset values.
Calibration Factor 4 Parameters used during data processing, includes sensor position as well as sensor scaling and offset values.
Calibration Factor 5 Parameters used during data processing, includes sensor position as well as sensor scaling and offset values.
Calibration Factor 6 Parameters used during data processing, includes sensor position as well as sensor scaling and offset values.
SPUNo Number of the Signal Processing Unit (SPU) used to acquire dynamic data from SenosrName.
Card Pertains to physical DAQ connection.

Channel

Pertains to physical DAQ connection.

Channel Status

Pertains to physical DAQ connection – 1 is collect, 0 is no collection.

Mux

Number assigned to the multiplexer (MUX) used to acquire static data from SensorName.

PhaseID

Test section number.

Comments Comments regarding sensor.

 

Return to Search CC8 Phase 3 Database 

 


 

Query Sensor Data

TestItemSensorIDSensorNameSensorTypeUnitGageTypeLocationX_FTLocationY_FTLocationZ_FTDepth_INCalibrationFactor1CalibrationFactor2CalibrationFactor3CalibrationFactor4CalibrationFactor5CalibrationFactor6SPUNoCardChannelChannelStatusPhaseIDMUXComments
South83300EG-N-J-II-1Full BridgemicrostrainEmbedded Gage425.00-14.7557.921.00709561425-14.75133013  
South83301EG-N-J-II-2Full BridgemicrostrainEmbedded Gage425.00-14.7557.0910.88754.25561425-14.7510.87533113  
South83304EG-N-J-II-5Full BridgemicrostrainEmbedded Gage429.75-10.0057.921.00744.25561429.75-10133413  
South83305EG-N-J-II-6Full BridgemicrostrainEmbedded Gage429.75-10.0057.0910.88740.5561429.75-1010.87533513  
South83348ECS-N-J-II-1DeflectionmilsEddy Current Sensor429.75-14.7557.0012.0017.5711.8429.75-14.7512334813  
1